Twin shaft mixers MEB are made of an omega-shaped tank, realized in elevated thickness metal sheet and reinforced with structural pipes. Inside the tank is covered by interchangeable wear lining. Mixing shafts are activated by two electrical motors, placed on high position to make maintenance operations easier. Supports are placed on the external part of the tank to avoid contact with the mixture and to make easier cleaning operations. All arms are screwed to the shafts for fast change during maintenance. The greasing unit includes the distribution of grease in the most important points of the mixer. All points to be greased are located in a one zone of the mixer. The discharge gate is provided with limit switches for partial or total opening and closing. The mixer trough cover is equipped with large maintenance hatches that are opened with the aid of gas springs, dust seal and second hatch. A hydraulic hand pump enables to open the discharging gate in case of emergency.
STRENGHTS
- Production of high-quality concrete with a low water/cement ratio;
- Homogeneous distribution of the cement throughout the mixture with a consequent reduction in the dosage of the cement with the same strength of the concrete;
- Low maintenance costs;
- High resistant mixing blades made in HARDOX 500 HN thickness 20 mm;
- Large inspection hatch, complete with protection grid, dust seal and secondary hatch.
STRENGHTS
- Production of high-quality concrete with a low water/cement ratio;
- Homogeneous distribution of the cement throughout the mixture with a consequent reduction in the dosage of the cement with the same strength of the concrete;
- Low maintenance costs;
- High resistant mixing blades made in HARDOX 500 HN thickness 20 mm;
- Large inspection hatch, complete with protection grid, dust seal and secondary hatch.
MEB 1500
| TECHNICAL DATA | SI UNITS | VALUE |
|---|---|---|
| Dry capacity | It | 1500 |
| Fresh concrete output | It | 1200 |
| Vibrated concrete output | It | 1000 |
| Mixing motors power | kW | 2x18 |
| Hydraulic power | kW | 1x9,2 |
| Skip motor power | kW | 1x11 |
| Mixing arms | n. | 14 |
| Empty weight (without skip) | kg | 4500 |
| Empty weight (with skip) | kg | 6200 |
MEB 2250
MEB 2500
MEB 3000
MEB 3750
MEB 4500
MEB 5000
MEB 6000
MEB 7500
MEB 9000
MEB 12000
Sales office
+39 335 7320 949
+39 345 6900 215
+39 335 7151 919
+39 335 6792 771
+39 342 5439 331
+49 6190 9376 550
